null

Siser Blackboard Instructions

Siser Blackboard Heat Transfer Vinyl Sheets

BlackBoard™ Heat Transfer Vinyl

Write it, Wipe it, Repeat!

Now you can turn any fabric into a writable surface that can be used over and over again! New BlackBoard™ heat transfer vinyl by Siser®, transforms plain materials into a walking chalkboard – without making you feel like a walking sandwich board! Lightweight and super soft, BlackBoard is unlike any HTV you’ve ever experienced. This revolutionary material only needs 275°F of heat with medium pressure for just 15 seconds to create a machine washable chalkboard! With a low application temperature and warm peel carrier, this HTV is ideal for heat sensitive materials.

Compatible with standard chalk, Blackboard is as easy to re-use as it is to apply. Simply wipe clean with a damp cloth to start again! There are countless ways to advertise, organize, and customize with BlackBoard heat transfer vinyl.

BlackBoard is CPSIA Certified so you can decorate children’s items with peace of mind.

Siser Blackboard Heat Transfer Vinyl

Garment

  • 100% cotton
  • Poly/cotton blends
  • 100% polyester

Application instructions (home iron)

  1.  Set iron dial between Cotton and Linen
  2.  Cover design with Kraft paper or non-stick cover sheet
  3.  Place on flat, hard surface (ironing board not recommended)
  4.  Press iron with medium/firm pressure (do not slide iron)
  5.  Press each section of design for 10-15 seconds
  6.  If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
  7.  Peel carrier hot or cold

Application instructions (heat press)

  1.  Cut in reverse
  2.  Weed excess material
  3.  Preheat garment for 2-3 seconds
  4.  Apply design at 275°F/135°C
  5.  Use light/medium pressure for 15 seconds
  6.  Peel carrier hot or cold

Washing Instructions

  • Wait 24 hours before 1st wash
  • Machine wash cold / mild detergent
  • Dry on normal dryer setting
  • Do not dry clean

Cricut

  • Blade: Standard
  • Setting: Paper

Silhouette Cameo

  • Blade: Standard, 3
  • Setting: Heat Transfer Material (Smooth)
  • Speed: 5
  • Thickness: 8