Categories

Siser Brick Instructions

Siser Brick™ 600 Heat Transfer Vinyl

Siser Brick is 600 micron thick, flexible heat transfer vinyl that's designed for smaller logos and designs to add extra dimensions to your garment. Brick has a matte finish!

Brick 600™ HTV colors:

  • White
  • Black
  • Red
  • Yellow
  • Green
  • Royal Blue
  • Navy

 

Garment:

  • 100% cotton
  • Poly/cotton blends
  • 100% polyester

Application Instructions (Home Iron):

  • Set iron dial between Cotton and Linen
  • Cover design with Kraft paper or non-stick cover sheet
  • Place on flat, hard surface (ironing board not recommended)
  • Press iron with medium/firm pressure (do not slide iron)
  • Press each section of design for 10-15 seconds
  • If areas of design lift after application, replace cover sheet and re-press for 10 seconds
  • Peel carrier cold

Application Instructions (Heat Press):

  • Cut in reverse
  • Weed excess material
  • Preheat garment for 2-3 seconds
  • Apply design at 311°F/155°C
  • Use medium/firm pressure for 20 seconds
  • Peel carrier cold

Washing Instructions:

  • Wait 24 hours before first wash
  • Machine wash cold / mild detergent
  • Dry on low dryer setting
  • Do not dry clean

Cricut:

  • Blade: Standard
  • Setting: Cardstock Light +

Silhouette Cameo:

  • Blade: Standard, 10
  • Material: Heat Transfer, Flocked
  • Speed: 4
  • Force: 10