Barn wood Heat transfer vinyl

Siser EasyPatterns - Barn Wood - HTV - 12" x 36" Roll

(No reviews yet) Write a Review


Siser EasyPatterns

 Heat transfer vinyl

12" x 36" Roll 

Siser EasyPatterns HTV DO NOT come with a carrier sheet. You must use Siser's TTD High Tack Mask.

You can Purchase it HERE

You do not need to mirror your design with these patterns, you cut and weed with the design face up, weed and the apply Siser's TTD High Tack Mask. 



  •  100% cotton
  •  Poly/cotton blends
  •  100% polyester
  •  Leather
  •  Lycra®/spandex

Application Instructions (home Iron)

  • Set iron dial between Cotton and Linen
  • Cover design with Kraft paper or non-stick cover sheet
  • Place on flat, hard surface (ironing board not recommended)
  • Press iron with medium/firm pressure (do not slide iron)
  • Press each section of design for 15 seconds
  • If areas of design lift after application, replace cover sheet and re-press for 10 seconds
  • Peel carrier hot or cold

Application instructions (heat press)

  • Weed excess material
  • Preheat garment for 2-3 seconds
  • Apply design at 305°F/150°C
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold
  • Cover and reheat for 2-3 seconds

Washing Instructions

  • Wait 24 hours before 1st wash
  • Machine wash cold / mild detergent
  • Dry on normal dryer setting
  • Do not dry clean
  • Do not bleach


  • Blade: Standard
  • Setting: Iron-on

Silhouette Cameo

  • Blade: Standard, 3
  • Material: Heat Transfer, Smooth
  • Speed: 8
  • Force: 6