Siser EasyReflective Instructions

Siser EasyReflective Heat Transfer Vinyl

Siser EasyReflective is a reflective Heat Transfer Vinyl constructed of glass bead technology to illuminate the darkest conditions.

Siser EasyReflective is Perfect For:

  • Construction Gear
  • Pet Clothes
  • Sport Uniforms
  • Cycling

Garment Types:

  • 100% cotton
  • Poly/cotton blends
  • 100% polyester
  • Nylon (testing recommended

Application Instructions (Home Iron):

  • Set iron dial between Cotton and Linen
  • Cover design with Kraft paper or non-stick cover sheet
  • Place on flat, hard surface (ironing board not recommended)
  • press iron with medium/firm pressure (do not slide iron)
  • Press each section of design for 10-15 seconds
  • If areas of design lift after application, replace cover sheet and re-press for 10 seconds
  • Peel carrier warm

Application Instructions (Heat Press):

  • Cut in reverse
  • Weed excess material
  • Preheat garment for 2-3 seconds
  • Apply design at 305°F/150°C
  • Use medium pressure for 15 seconds
  • Peel carrier warm (at least 15 seconds off press)

Washing Instructions:

  • Wait 24 hours before 1st wash
  • Machine wash warm or cold / mild detergent
  • Can be machine dried on low but hanging item to dry will preserve reflective quality
  • Do not dry clean


  • Blade: Standard
  • Setting: Iron-on 

Silhouette Cameo:

  • Blade: Standard, 3
  • Setting: Heat Transfer Material (Smooth)
  • Speed: 8
  • Thickness: 6

Please Note: The indicated cut settings are based upon tests believed to be reliable and true. Due to the varying conditions of every individual’s blade, cutting strip, cutting mat, and other accessories, the given values are only intended as a starting point. Therefore, they’re given without guarantee and do not constitute a warranty. The purchaser should independently determine their ideal cut settings through test cuts when using different materials or colors of a material.