Siser Sparkle Instructions


Specifications: • Pressure sensitive backing  • 120 Microns/4.7 Mils • Can be layered

Sparkle’s appearance and feel is very similar to our now-discontinued material VideoFlex
Glitter. Containing a mix of embedded colored and silver glitter flakes, Sparkle also comes
on a pressure-sensitive (sticky) backing to make weeding a breeze!



  • 100% cotton
  • Poly/cotton blends
  • 100% polyester
  • Leather

Application instructions (home iron):

  1.  Set iron dial between Cotton and Linen
  2.  Cover design with Kraft paper or non-stick cover sheet
  3.  Place on flat, hard surface (ironing board not recommended)
  4.  Press iron with medium/firm pressure (do not slide iron)
  5.  Press each section of design for 10-15 seconds
  6.  If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
  7.  Peel carrier hot or cold

Application instructions (heat press):

  1.  Cut in reverse
  2.  Weed excess material
  3.  Preheat garment for 2-3 seconds
  4.  Apply design at 305°F/150°C
  5.  Use medium/firm pressure for 15 seconds
  6.  Peel carrier hot or cold

Washing Instructions:

  • Wait 24 hours before 1st wash
  • Machine wash cold / mild detergent
  • Dry on normal dryer setting
  • Do not dry clean


  • Blade: Standard
  • Setting: Iron-On

Silhouette Cameo:

  • Blade: Standard, 2
  • Setting: Heat Transfer Material (Smooth)
  • Speed: 8
  • Force: 4

Please Note: The indicated cut settings are based upon tests believed to be reliable and true. Due to the varying conditions of every individual’s blade, cutting strip, cutting mat, and other accessories, the given values are only intended as a starting point. Therefore, they’re given without guarantee and do not constitute a warranty. The purchaser should independently determine their ideal cut settings through test cuts when using different materials or colors of a material.