WebFLEX Matte Heat Transfer Vinyl
12" x 60" roll of WebFLEX Matte HTV
- Clear Polyester
- 4 Mil
- Matte Finish
- 12" x 60" roll
Prior to application, preheat the garment for 10 seconds.
This flattens out wrinkles and eliminates moisture in the fabric.
Place the material into the cutter with the transfer carrier (shiny side) down.
Cut the logo, word or numbers in the reverse (mirror image).
Weed away excess material leaving the desired graphic on the carrier.
Position the weeded design on the garment with the carrier side up.
Place cover sheet or teflon sheet over graphic.
Apply heat for 12-15 seconds using light pressure.
The press should be set at 330 degrees F.
Peel the carrier while warm.
WEbFLEX does not have an adhesive backing making it possible to stack designs after being weeded.
Webflex is a made in USA product
The way they feel on shirt after pressing this is only brand I use now
Ante Up Graphic Supply offers a brand of HTV called Webflex that has the softest feel of any HTV I've used thus far. It weeds very well and doesn't have a sticky backing which allows me to stack the designs on top of one another. The price is unbeatable and the quality unmatched. I've used Webflex on a variety of garments from 100% cotton to 100% polyester. Webflex even stands up well on jackets; I've sold plenty of them without any complaints. I love this stuff!
I didn't like this product very much. It made me so nervous to remove as it was tough to pull back unlike Sizer. It also lifted while still warm, I had to wait until it was completely cool to peel off. I like the price but I'd rather pay a little more to knowing that that my designs will attach to the shirts and clear will peel off easily.
The material is so Soft and has a Good Bit of Stretch to it! Making it Even more Awesome than I expected!! Cannot wait for more colors to be available!!!
This material is super thick and very hard to weed. Not my favorite. I had a hard time even seeing the design that was cut.
I was hoping this would have proven to be the same if not better than Easyweed. I am really DISAPPOINTED, I HATE this product. I can not see the cuts and end up poking a hole in the design or because it is non-stick if I pull up a corner or part of a letter it will never lay back down. If it does not lay back down it can fold under during placement and be melted to the underside of the design. If a complete letter is accidentally removed you can not get the alignment right as you pretty much have to manually stick the letter to the material and keeping adjusting the main design hoping to get it right. Even when adjusting the temp, pressure, time etc according to what's listed removing the carrier sheet is a pain. Peel too soon after pressing and it pretty much rips it apart like melted cheese, wait 5-10 seconds and it will peel the vinyl back up as I fight to remove carrier sheet. I spent 3-4 times longer trying to figure out where to pull to weed them. The shirts are pretty much trash quality because the issues described above. I tried and got the same results weeks ago when I first received the product and waited and tried again hoping for better results when I could dedicate more time to testing it out. I will never buy this product again and will never use it on a client or personal item even to just use it up.
I just used this product this week and it is a life changer. The transfer sheet isn't sticky, and the vinyl comes off so easily when weeding. The vinyl itself actually looks higher quality when laid side by side with Siser. I will definitely only be using this product going forward!!!