WebFLEX Matte Heat Transfer Vinyl
12" x 9" sheet of WebFLEX Matte HTV
- Clear Polyester
- 4 Mil
- Matte Finish
- 12" x 9"
Prior to application, preheat the garment for 10 seconds.
This flattens out wrinkles and eliminates moisture in the fabric.
Place the material into the cutter with the transfer carrier (shiny side) down.
Cut the logo, word or numbers in the reverse (mirror image).
Weed away excess material leaving the desired graphic on the carrier.
Position the weeded design on the garment with the carrier side up.
Place cover sheet or teflon sheet over graphic.
Apply heat for 12-15 seconds using light pressure.
The press should be set at 330 degrees F.
Peel the carrier while warm.
WEbFLEX does not have an adhesive backing making it possible to stack designs after being weeded.
Webflex is a made in USA product
Used with a fairly large design and the weeding was so much easier without the stickiness from normal easy weed.
Did have a couple letters pull up, but can be solved by letting it cool a little before peeling the carrier sheet.
A little difficult to see to start weeding without a light underneath.
All around I prefer it to easy weed.
I purchased this for shirts I make for my 4H club. We have a logo that is somewhat detailed and this was difficult to use with small pieces. I had little dashes that would start to peel and then because it does not have the adhesive I couldn't get them to stay in place. I got very frustrated and had to walk away from the weeding.
I will say that for the names we put on the back of the shirts it worked out great. Very easy to weed the larger letters (2" high) and the excess didn't keep getting stuck back to the carrier sheet.
As for the actual product after it was pressed, it looks great. I did have a little trouble with a couple of letters pulling up, but I fixed that by waiting a couple seconds before I peeled the carrier sheet.
So all in all it has it's advantages and disadvantages. I will buy again for some projects, but not others.
I pressed a larger design with this last night and it is so SOFT. Not at all plasticky feeling like Easyweed can be. And the Matte finish just makes it.
I've been using Siserweed for quite a while; however, this was a game changer! So much easier to weed. I had to do an order for 30 shirts. I was able to stack my designs up until I was ready to press. Love it! Hope it is coming in more colors soon!