Siser EasyPattern Instructions

Siser EasyPatterns Heat Transfer Vinyl 

Siser EasyPatterns do not come with a carrier sheet. You must use Siser TTD High Tack Mask is required for application.

You can purchase Siser TTD High Tack Mask HERE. 


  •  100% cotton
  •  Poly/cotton blends
  •  100% polyester
  •  Leather
  •  Lycra®/spandex

Application Instructions (Home Iron):

  • Set iron dial between Cotton and Linen
  • Cover design with Kraft paper or non-stick cover sheet
  • Place on flat, hard surface (ironing board not recommended)
  • Press iron with medium/firm pressure (do not slide iron)
  • Press each section of design for 15 seconds
  • If areas of design lift after application, replace cover sheet and re-press for 10 seconds
  • Peel carrier hot or cold

Application Instructions (Heat Press):

  • do not mirror your image
  • Weed excess material
  • Preheat garment for 2-3 seconds
  • Apply design at 305°F/150°C
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold
  • Cover and reheat for 2-3 seconds

Washing Instructions:

  • Wait 24 hours before 1st wash
  • Machine wash cold / mild detergent
  • Dry on normal dryer setting
  • Do not dry clean
  • Do not bleach


  • Blade: Standard
  • Setting: Iron-on

Silhouette Cameo:

  • Blade: Standard, 3
  • Material: Heat Transfer, Smooth
  • Speed: 8
  • Force: 6