Siser Glitter HTV

Siser Glitter Heat Transfer Vinyl

When you really want your designs to stand out you use Siser Glitter Heat Transfer Vinyl. 


  • 100% Cotton
  • 100% Polyester
  • Poly/Cotton Blends
  • Leather

Application Instruction (home iron)

  1. Set iron dial between Cotton and Linen
  2. Cover design with Kraft paper or non-stick cover sheet
  3. Place on flat, hard surface (ironing board not recommended)
  4. Press iron with medium/firm pressure (do not slide iron)
  5. Press each section of design for 10-15 seconds
  6. If areas of design lift after application, replace cover sheet and re-press for 10 seconds
  7. Peel carrier hot or cold

Application Instructions (heat press)

  1. Cut in reverse
  2. Weed excess material
  3. Preheat garment for 2-3 seconds
  4. Apply design at 320°F/160°C
  5. Use firm pressure for 15-20 seconds
  6. Peel carrier warm

Washing Instructions

  • Wait 24 hours before 1st wash
  • Machine wash warm or cold / mild detergent
  • Dry on normal dryer setting
  • Do not dry clean


  • Blade: Standard
  • Setting: Iron On+

Silhouette Cameo

  • Blade: Standard, 4
  • Setting: Heat Transfer
  • Material: Smooth
  • Speed: 8
  • Thickness: 11

Please Note: The indicated cut settings are based upon tests believed to be reliable and true. Due to the varying conditions of every individual’s blade, cutting strip, cutting mat, and other accessories, the given values are only intended as a starting point. Therefore, they’re given without guarantee and do not constitute a warranty. The purchaser should independently determine their ideal cut settings through test cuts when using different materials or colors of a material.

There are no products listed under this category.