null

Siser EasyWeed Heat Transfer Vinyl Instructions

SISER EASYWEED HEAT TRANSFER VINYL 

Specifications: PU Composition • Pressure sensitive backing • Semi-gloss finish • 90 Microns/3.5 Mils • 45°/60° blade • Can be layered

Siser EasyWeed is the most popular heat transfer vinyl available. 

EasyWeed HTV can be applied with an iron or a heat press and comes with a carrier sheet. 

SISER EASYWEED HEAT TRANSFER VINYL

  • - 12" x 15" sheets - HERE - Actual Dimension 12" x 14.75"
  • - 5 ft rolls HERE  - Actual Dimension 11.8" x 59"
  • - 30 ft rolls HERE - Actual Dimension 11.8 x 30 ft
  • - Bundle packs HERE 

Siser Easyweed heat transfer vinyl rolls are actually 11.8" x 59". We allow a 0.25" (-/+) tolerance.

Siser Easyweed heat transfer Vinyl sheets are actually 12" x 14.75". We allow a 0.25" (-/+) tolerance.

Siser EasyWeed heat transfer Vinyl 30 ft rolls are actually 11" x 30 ft. We allow a 0.25" (-/+) tolerance.

 

 

Siser EasyWeed HTV Colors

Ante Up Graphics carries the colors and styles of Siser EasyWeed you need. We have in stock:

  • 55 Solid Color
  • 7 Matte Color
  • 7 Fluorescent Colors
  • 1 Glow in the Dark

Siser EasyWeed Heat Transfer Vinyl

Garment

  • 100% cotton
  • Poly/cotton blends
  • 100% polyester
  • Leather

Application instructions (home iron)

  1.  Set iron dial between Cotton and Linen
  2.  Cover design with Kraft paper or non-stick cover sheet
  3.  Place on flat, hard surface (ironing board not recommended)
  4.  Press iron with medium/firm pressure (do not slide iron)
  5.  Press each section of design for 10-15 seconds
  6.  If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
  7.  Peel carrier hot or cold

Application instructions (heat press)

  1.  Cut in reverse
  2.  Weed excess material
  3.  Preheat garment for 2-3 seconds
  4.  Apply design at 305°F/150°C
  5.  Use medium/firm pressure for 15 seconds
  6.  Peel carrier hot or cold

Washing Instructions

  • Wait 24 hours before 1st wash
  • Machine wash cold / mild detergent
  • Dry on normal dryer setting
  • Do not dry clean

Cricut

  • Blade: Standard
  • Setting: Iron-On

Silhouette Cameo

  • Blade: Standard, 3
  • Setting: Heat Transfer Material (Smooth)
  • Speed: 8
  • Force: 6