Categories

Siser StripFlock PRO Instructions

StripFlock® Pro Heat Transfer Vinyl

The Only Flock in the Industry that can be Layered On Itself.

A great alternative to embroidery, StripFlock Pro heat transfer vinyl gives logos a raised, textured, suede-like feel. The deep, opaque colors make StripFlockPro excellent for retro designs or anytime you want a rich look. StripFlock Pro looks excellent on caps, bags, and garments that need textured visual interest. Use Stripflock Pro as a base layer and cover with other materials or more StripFlock! The ability to layer this material allows you to say “yes” to multi-color designs.

StripFlock Pro is CPSIA Certified so you can decorate kids’ items with confidence.

Garment

  • 100% Cotton 
  • Poly/cotton blends
  • 100% polyester
  • Leather

Application instructions (home iron)

  •  Set iron dial between Cotton and Linen
  •  Cover design with Kraft paper or non-stick cover sheet
  •  Place on flat, hard surface (ironing board not recommended)
  •  Press iron with medium/firm pressure (do not slide iron)
  •  Press each section of design for 10-15 seconds
  •  If areas of design lift after application, replace cover sheet and re-press for 10 seconds
  •  Peel carrier hot or cold

Application Instructions (heat press)

  • Cut in reverse
  • Weed excess material
  • Preheat garment for 2-3 seconds
  • Apply design at 311°F/155°C
  • Use medium pressure for 15 seconds
  • Peel carrier hot or cold

 Washing Instructions

  • Wait 24 hours before 1st wash
  • Machine wash warm or cold / mild detergent
  • Dry on normal dryer setting
  • Do not dry clean

Cut Settings

Cricut:

  • Blade: Standard
  • Setting: Iron-On 

 Silhouette Cameo:

  • Blade: Standard, 4
  • Material: Heat Transfer, Flocked
  • Speed: 5
  • Force: 6