3G JET OPAQUE® HEAT TRANSFER PAPER 8.5"X11" SHEET (DARK FABRICS)
- 8.5in x 11in sheet.
- For use on Natural and 50/50 Fabric.
- Works well with photos.
- For dark fabrics.
- Print image on coated side of paper right reading (do not mirror the image).
- Trim away the unprinted areas of the transfer if desired.
- Prepare the fabric material by ensuring the surface is clean, dry, and wrinkle free by using a lint brush and your heat press.
- Remove the backing paper from the printed image.
- Place the Printed Heat Transfer Paper on the top of the garment with the image facing up (right reading to you).
- Completely cover the image with one sheet of Teflon paper or Parchment paper.
- Press: at 350°F/177°C for 30 seconds with medium pressure.
- PEEL COLD. Peel away carrier sheet in a smooth even motion.
*Ante Up Graphics Inc is not responsible for the outcome of this product, and will not replace product or garment if the desired results are not achieved.
This product is highly requested so we are offering it to you.